Installing the Bounce Dryer Bar is simple and can be completed in just a few easy steps. Just be sure to wipe down the dryer drum before you install the bar.

Step 1:

Select a location on the drum BETWEEN the dryer fins. DO NOT pick the back wall, the door nor the fins (the pieces that stick up from the dryer drum).

Step 2:

Wipe the area clean and dry and be sure it is free of any residue.

Step 3:

Peel back the paper backing from the adhesive on the back of the white holder of the dryer bar.

Step 4:

Stick the bar to your dryer and press firmly for 15 seconds. Be sure it's exactly where you want it before you attach it - changing locations will result in the holder falling off of your dryer. You can not reuse the adhesive.

Step 5:

Wait 15 minutes before using.

How to Replace the Bounce Dryer Bar

Step 1:

Depending on the size of the bar you buy, you can leave the bar in the dryer for about two or four months of automatic freshness, depending on frequency of use and dryer settings. Once it is ready to be changed, the base will begin to reveal the word 'replace' where the bar has faded away.

Step 2:

To remove the old bar, press the tabs at the end of the white holder and slide out the old bar.

Step 3:

To replace the bar, simply purchase a new bar and white holder. Slide the new bar out of the new white holder. Although you don't need to replace the white holder every time you replace the bar, we recommend that you keep the new white holder in storage for future use if needed.